Updating/Replacing the ISOs the Cristie VA uses

[RobW]

To update/replace ISOs used withing the Cristie VA you will first need to access the ISOs share within the VA.

Windows

In Windows you will need to browse to \\< Cristie VA IP Address >\isos
Here you will be able to see the ISOs the Cristie VA uses and modify the contents of that folder.

The VA requires the ISOs to have a specific name, so we recommend renaming the original ISOs and then Copying the new ISOs in their place.

Please note, if you are having dificulty accessing this share, please see the KB below:

Accessing the Cristie VA shares from Windows 10

To access the shares on the VA from a Windows 10 machine you will first need to change the following settings: Allow windows to use SMB v1 by running the following command via Powershell: Enable-WindowsOptionalFeature -Online -FeatureName smb1protocol Allow Windows guest access, this is achieved by changing the Group Policy settings: https://support.microsoft.com/en-gb/help/4046019/guest-access-smb2-disabled-by-default-in-windows-10-server-2016 Computer configuration\administrative temp…

Linux

In Linux you will be required to either mount the share < Cristie VA IP Address >/isos or SCP the ISOs to the Cristie VA.
We recommend mounting the share, allowing you to easily rename the original ISOs.

The VA requires the ISOs to have a specific name, so we recommend renaming the original ISOs and then copying the new ISOs in their place.